iOS 4.3 Camera Bug: Flash is Disabled The iPhone needs to cool down before you can use the flash
So apple has a bug that has been known since iOS 4.3. I saw this bug in iOS 4.3.1 and it still has not been fixed in iOS 4.3.2. When you launch the camera app going through the specific steps below you will get a message that says: Flash is Disabled The iPhone needs to cool down before you can use the flash.
I know for a fact that my iPhone is not overheating and have even found out a way to replicate this camera roll bug. To see the bug for yourself on iOS 4.3.1 and 4.3.2 follow these steps:
1. Open up the camera app.
2. Switch to the front facing camera.
3. press the camera roll button in the bottom left corner.
4. After viewing the picture press Done.
5. Switch back to the rear camera.
6. You will see a flash symbol with a triangle and exclamation point. Press this and you will see the message pop up on the screen: Flash is Disabled The iPhone needs to cool down before you can use the flash.
This is a really annoying bug but to fix it for now is just to exit out of the camera app and re-open it. Hopefully Apple fixes this in the next iOS firmware update.
Incoming search terms:
- iphone needs to cool down before flash
- flash is disabled iphone
- iphone flash disabled
- the iphone needs to cool down flash
- iPhone flash cool down
- the iphone needs to cool down before you can use the flash
- iphone 4 flash needs to cool down
- iphone flash is disabled
- how to fix the flash on iphone 4
- Iphone needs to cool down flash
[UPDATED] Review + Tutorial: iPhone IMEI Remote Unlock
[Update] Hey guys, if you want to ensure that your unlock stays forever (even if Apple makes your IMEI uneligable again, download SAM Prefs by going to Cydia and adding the source “http://repo.bingner.com”.
Then after you install (you must reboot) you have to go into the app (should be a SIM card) and tap “utilities” and then backup activation. Your NCK (unlock) will be sent to the cloud where it can be restored later. 
Hey guys, well, as you may have heard, there are now new ways to unlock your iPhone! Now, this is a great service, why? You don’t need to care about baseband updates anymore!
Once you are unlocked via IMEI, then all you have to do is plug it into iTunes.
Today, I will be reviewing an unlocking service, unlock-network.com.
Unlock-Network.com is a very well organized company that was great to work with. They are also very reliable and were the only ones that I felt could handle my personal information.
Now, I’ve made a video showing you how the whole process happens:
So basically, this is how it all works. You go to Unlock-Network.com and you choose which device you want to unlock (in my case, it was the iPhone 3G [S]). Then, you just enter your IMEI (to find your IMEI, dial *#06# on your iPhone) and then choose which network the phone is locked to. (Everyone in the U.S. should click “AT&T/Cingular”.)
Then, you have the option to pay with either PayPal or Google Checkout. It will be $174.99 for an iPhone.
Now, it may look like a steep price at first, but keep in mind that if you live in the U.S. you would have to pay atleast $1,000 for a phone from another country. If you want to have a 32 GB model, then it goes up to $1,500, at least.
It’s a good deal that can potentially save you hundreds.
Now, the unlock is performed remotely, to finish the unlocking process, plug your iPhone into an internet-enabled computer and sync with iTunes.
That’s it!
It’s incredibly easy and I can confirm that this works 100%! It took a matter of hours for me to recieve my confirmation that it was unlocked.
They advertise a 24-48 hours delivery time. They will also give you your money back if the unlock doesn’t work for any reason.
This will work on all baseband versions (they even advise you to update to iOS 4.3.1/4.3.2 before unlocking) and it will work on any and all models of the iPhone 3G [S] and iPhone 4.
So there you go guys! Happy unlocking!
Thanks to Unlock-Network.com for the unlock!
Here’s an image gallery that shows you some highlights from the unlock process:
Incoming search terms:
- iphone imei unlock
- unlock iphone imei
- imei iphone unlock
- iPhone remote unlock
- imei unlock iphone
- remote unlock iphone 4
- iPhone 4 imei unlock
- remote unlock iphone
- imei unlock iphone 4
- iphone 4 remote unlock
Tethered Jailbreak for iOS 4.3.2 Available
The Latest version of RedSn0w will jailbreak iOS 4.3.2 but will be a tethered jailbreak. Tethered means that you will have to hook it up to the computer and run RedSn0w every time you reboot the device. Hopefully they can create a way to untether soon.
In order to jailbreak iOS 4.3.2 you just have to run RedSn0w and point to the iOS 4.3.1 firmware file.
As soon as we have more information we will let you know!
Incoming search terms:
- bbyscroopy pirat3 com cydia not working
- 4 3 2 mms
Apple Releases iOS 4.3.2
Apple just released iOS 4.3.2 which contains improvements and other bug fixes including:
-Fixes an issue that occasionally caused blank or frozen video during a FaceTime call
-Fixes an issue that prvented some international users from connecting to 3G networks on iPad W-Fi + 3G
-Contains the latest security updates
Products compatible with this software update:
-iPhone 4 (GSM model)
-iPhone 3GS
-iPad 2 (2,1=WiFI, 2,2=AT&T, 2,3=Verizon):
iPad2,3_4.3.2_8H8_Restore.ipsw
iPad2,2_4.3.2_8H7_Restore.ipsw
iPad2,1_4.3.2_8H7_Restore.ipsw
-iPad
-iPod touch (4th generation)
-iPod touch (3rd generation)
You can find all iOS firmware downloads here: http://leimobile.com/firmware-downloads/
ULTRASN0W UNLOCKERS: Stay away and make sure that you save your SHSH files with TinyUmbrella for iOS 4.3.1 before the window closes.
Incoming search terms:
- iphone 4 mms tmobile 4 3 2
- 4 3 2 MMS FIX
- mms fix for iphone 4 4 3 2
- tmobile iphone mms settings 4 3 2
- tmobile mms settings iphone 4 3 2
- iphone 4 4 3 2 tmobile mms settings
- facetime waiting for activation 4 3 2
- tmobile mms 4 3 2
- 4 3 2 tmobile
- facetime activation tmobile
Tutorial: Prevent iPhone 4 Baseband Update iOS 4.3.1 Upgrade
Now that UltraSn0w has been updated to support iOS 4.3.1 and the jailbreak is also untethered, you can now easily upgrade to the latest iOS and preserve your baseband so that you can unlock your iPhone 4. This tutorial will show you how to preserve your iPhone 4 baseband and unlock. This is assuming that you have modem firmware 01.59.00.
Sn0wBreeze is a windows version of PwnageTool that will create a custom firmware and preserve your baseband, You can easily use either of these tools but for this tutorial I will show you how to use TinyUmbrella to preserve your baseband and upgrade to iOS 4.3.1 and then run RedSn0w to jailbreak. This tutorial will work on both Mac and windows. Just be sure to download the correct programs.
1. Download the latest TinyUmbrella.
2. Start Tiny Umbrella with your iPhone 4 plugged in. Save your SHSH files for iOS 4.3.1. (You should be saving your SHSH files whenever a new firmware comes out!)
3. Click on Start TSS Server. If you get any errors, visit the TinyUmbrella FAQ page and fix the errors before continuing.
4. Launch iTunes and click on restore while holding down the shift key if you are on Windows or the option key if you are on a Mac.
5. Select the iPhone 4 iOS 4.3.1 firmware file. If you don’t have it you can download it here: iPhone 4 Firmware restore file for 4.3.1 (If it saves as a .zip file make sure to rename it to .ipsw).
6. The restore process should get a 1013 error. Click on OK and close out of iTunes. Your iPhone 4 will have a connect to iTunes logo displaying. If you get an error other than 1013, it means your baseband was updated. This is likely because you did not have the TSS server running or you are using a device other than an iPhone 4.
7. We need to get the iPhone 4 into DFU mode by holding the home and power button until the screen goes black. Then count to 2 and let go of the power button but keep holding down the home button. Your screen will turn black if you did it correctly. If not you will see an Apple logo and the screen will go back to the connect to iTunes logo. If you see this you need to start step 7 over.
8. Once you are in DFU mode you will need to download Fix Recovery to get out of recovery mode. [Windows Download] [OS X Download]
9. Run Fix Recovery and it will get you to the iPhone activation screen.
10. You will now need to activate your iPhone 4. To activate it the correct way you will want to put whatever sim card the iPhone is locked to in and start iTunes. Most iPhone are locked to AT&T so put in any AT&T sim in to activate. It does not need to have service. If you do not have a sim to activate we will use RedSn0w to Hacktivate.
11. Start RedSn0w and jailbreak. RedSn0w will hacktivate if you did not activate officially in step 10:
redsn0w_0.9.6rc12: (current version as of writing this)
12. Once you are done following the RedSn0w instuctions you will have Cydia on your iPhone’s home screen. Launch Cydia, do all of the updates and then install the UltraSn0w package to unlock. You will also want to download our T-Mobile MMS fix if you are on T-Mobile.
Incoming search terms:
- iphone 4 baseband
- update iphone 4 baseband
- upgrade baseband iphone 4
- save baseband
- how to upgrade iphone 4 baseband
- prevent baseband update iphone 4
- prevent iphone 4 baseband update
- how to keep baseband on iphone 4
- How to save baseband
- update iphone 4 keep baseband
